emailmsg CONTACT US
CONTACT US

1-480-966-2300

WELCOME TO

MICROPULSE WEST

We take quality, precision and
manufacturing to the extreme

GET A FREE QUOTE

  • Upload Design Specs (CAD or Print Preferred)
    Accepted file types: sldprt, slddwg, stp, pdf, jpg, dxf, dwg, x_t, x_b, stl.
  • Accepted file types: sldprt, slddwg, stp, pdf, jpg, dxf, dwg, x_t, x_b, stl.

ELECTRONICS MANUFACTURING & MACHINING

Electronics (Advanced Microwave Products) Industry Services

The High-Tech Electronics and Advanced Microwave Product industries are in need of very specialized parts to create components, products and other high tech equipment. Our techniques can accurately create these precise items. These industries are in need of a wide range of services because they often produce a variety of different products and require different machined parts. Parts may need to be made out of very specific materials that are difficult to cut. Our services can produce a number of parts and components that other techniques are not capable of.

eclectro

TYPICAL FIELDS OF APPLICATION

There are many different ways our techniques can be applied to the high-tech electronics industry.

Produce Prototypes Rapidly

Rapid Prototyping

Prototypes for new high tech or advanced microwave products can be rapidly produced and prototyped. The faster the prototypes can be created and tested the faster the finished products make it to market.

icon

Chassis Creation

The chassis for many high end electronics must fit perfectly in order to protect the delicate internal pieces. Our cases are cut to precise measurements and are identical in every way.

icon

Small or Large Size Parts & Components

Our equipment can create parts or components that are very small to very large. This is very helpful in electronics, were the sizes often range from tiny to large.

BENEFITS FOR ELECTRONICS INDUSTRY

There are many benefits for the Electronics (Advanced Microwave Products) Industry, we have named a few below.

Highly Accurate

Precise Cuts

Chassis and Advanced Microwave Engineering requires very precise intricate cuts. Our computer controlled machines and EDM methods can easily meet these requirements.

icon

Burr-Free Holes

Using EDM, we can create hole features without damaging the area around the hole. This method also leaves no burrs around the cut.

SMALL-&-LARGE-RUNS@1x

Small or Large Runs

Some parts may only be required in a very few specialized electronic devices, while others may need to be mass produced. We can do any size run of any product.

MOST RECENT ARTICLES

Wire EDM is Not Just for Tooling

Jan 30, 2017

You can think of wire EDM as the non-contact, 21st Century version of the fretsaw. A fretsaw is used to cut complex shapes from blocks of wood. The key to its versatility is the blade, which is essentially just an abrasive wire. Being thin and able to cut on all sides, the woodworker can turn it easily to follow…

Continue Reading

Down to the bone: Using EDM in medical device manufacturing

Nov 30, 2016

Say “medical device manufacturing” and most people think of investment cast hip joints and replacement patellas. The reality is, medical devices range from, as the FDA says, “…tongue depressors and bedpans to … pacemakers … and laser surgical devices.” Some of these devices need electro-discharge machining (EDM) for their manufacture while many more need EDM…

Continue Reading

6 Ways EDM Enables Better Part and Tool Design

Nov 14, 2016

Textbooks portray design and manufacture as a linear process, but in reality it’s more iterative. Features, tolerances and materials specified by Engineering Challenge Manufacturing, who respond by requesting design changes. Reasoned discussion usually leads to better choices, but ultimately the product must function the way the designer wants. In such situations the only solution may…

Continue Reading

OTHER INDUSTRIES SERVICED

OTHER INDUSTRIES SERVICES

OUR MACHINING PARTNERS

hass
sharp
kent
hardinge
gf
okamoto

GET IN TOUCH

EMAIL US

LATEST NEWS

Wire EDM is Not Just for Tooling

You can think of wire EDM as the non-contact, 21st Century version of the fretsaw. A fretsaw is used to cut complex shapes from blocks of wood. The key to its versatility is the blade, which is essentially just an abrasive wire. Being thin and able to cut on all sides, the woodworker can turn it easily to follow…

Down to the bone: Using EDM in medical device manufacturing

Say “medical device manufacturing” and most people think of investment cast hip joints and replacement patellas. The reality is, medical devices range from, as the FDA says, “…tongue depressors and bedpans to … pacemakers … and laser surgical devices.” Some of these devices need electro-discharge machining (EDM) for their manufacture while many more need EDM…

6 Ways EDM Enables Better Part and Tool Design

Textbooks portray design and manufacture as a linear process, but in reality it’s more iterative. Features, tolerances and materials specified by Engineering Challenge Manufacturing, who respond by requesting design changes. Reasoned discussion usually leads to better choices, but ultimately the product must function the way the designer wants. In such situations the only solution may…

What the World Would Be Like If Aerospace Precision Machining Didn’t Exist

Space may be the final frontier that scientists, engineers and explorers set their sights on today to discover strange new worlds that might support intelligent life and may one day allow for human colonies to thrive. Yet without the modern technologies and innovations offered by a precision metal machining company, life would be very different…

FOLLOW US

CONTACT US

ADDRESS: 444 W. 21st St. Ste. 101
Tempe, AZ 85282
PHONE: 1-480-966-2300
FAX: 1-480-966-2323
EMAIL: [email protected]